SVL Extension: Cork Roadbed

Over the weekend I laid down the cork roadbed that I made. This is the first time that I tried using pre-cut turnout pads and it sure made it a lot easier. I first glued down the turnout pads and then after the glue was dry, I filled in between with the long strips of cork roadbed. I used white glue to attach the cork to the foam base and I stuck straight pins through the cork every few inches to make sure that the cork dried flat. After everything was dry, I removed the pins and lightly sanded all of the cork. This assured that everything was nice and smooth for trackwork.

Now, it is time to start laying track! But first I need one more Atlas code 55 crossing. Time to run to the hobby store.